The Queensland Government is tenders from suitably qualified companies to undertake the navigation beacon replacement works to Gladstone Jacobs Channel Beacon JC4.
The major items included in the Works are as follows:
Supply and fabricate 610 mm diameter x 12.7 mm thick mild steel pile.
Transport pile and all beacon components to work site.
Handle, pitch and drive 610 mm diameter pile.
Supply, fabricate and galvanize pile cap.
Cut pile at specified height and install weld-on pile cap.
Supply and install Denso Steelcoat 100 protection system or approved equivalent to pile cap and pile cap splice weld.
Supply and install Denso Seashield 2000FD pile protection system or approved equivalent.
Supply, fabricate and install 2400 mm diameter work platform, port lateral daymark complete with platform mounted daymark frame and lamp stand.
Supply, fabricate and install galvanized steel ladder, complete with clamps to the orientation on the beacon as shown on the Drawings.
Supply, fabricate and install beacon identification sign with designation ‘JC4’.
Supply all fasteners including aluminium bolts, u-bolts, nuts and washers; Grade 316 stainless bolts, nuts and washers; galvanized mild steel bolts, nuts and washers; and all bolt insulation products.
Supply a registered Surveyor to set out replacement beacon position and pile cut-off height.
Fully extract existing 1200mm dia x 16mm thick steel tube pile stub and dispose ashore.
This contract does not include:
The supply and installation of the navigation light.
For detailed information on the specific goods / services sought under this tender, please review Section 5 - Specification in the Tender Document.
30 Sep, 2015
Building and Construction and Maintenance Services - (100%)
