View Contract Details

The Queensland Government is seeking tenders to undertake the supply and installation of the replacement Townsville S2 Beacon and to remove of the existing damaged beacon.

The main items of work include:

1. Supply and fabricate 1200 mm diameter x 16 mm thick mild steel pile.
2. Transport pile to work site.
3. Remove and dispose of the existing pile which consists of the existing work platform, lamp stand, navigation light, ladder sections and possibly some ladder clamps.
4. Handle, pitch and drive 1200 mm diameter pile.
5. Supply, fabricate and galvanize pile cap.
6. Cut pile at correct height and install weld-on pile cap.
7. Supply and install Denso Steelcoat 100 protection system or approved equivalent to pile cap and pile cap splice weld.
8. Supply and install Denso Seashield 2000FD pile protection system or approved equivalent.
9. Supply, fabricate and install 2400 mm diameter work platform, port lateral daymark complete with platform mounted daymark frame and lamp stand.
10. Supply, fabricate and install galvanized steel ladder, complete with clamps to the orientation on the beacon as shown on the Drawings.
11. Supply, fabricate and install clamp-on colour band and kickplate with beacon identification ‘S2’.
12. Supply all fasteners including aluminium bolts, u-bolts, nuts and washers; Grade 316 stainless bolts, nuts and washers; galvanized mild steel bolts, nuts and washers; and all bolt insulation products.
13. Supply a registered Surveyor to set out replacement beacon position and pile cut-off height.

This contract does not include:

1. The supply and installation of the navigation light.

For detailed information on the works sought under this tender, please review the Section 5 - Specificaion in the Tender Document.